ALSA Configuration: Difference between revisions

From Elvanör's Technical Wiki
Jump to navigation Jump to search
mNo edit summary
Line 34: Line 34:
pcm.!default {
pcm.!default {
         type plug
         type plug
         slave.pcm "mixHDMI"
         slave.pcm "mixPCH"
         hint {
         hint {
                 show on
                 show on
Line 41: Line 41:
}
}


pcm.!directPCH {
pcm.myHDMI {
         type plug
         type plug
         slave.pcm "hwPCH2"
         slave.pcm "mixHDMI"
         hint {
         hint {
                 show on
                 show on
                 description "Sound on the PCH, without dmix"
                 description "HDMI Sound Output"
         }
         }
}
}


pcm.!directHDMI {
        type plug
        slave.pcm "hwHDMI2"
        hint {
                show on
                description "Sound on the HDMI, without dmix"
        }
}


 
pcm.mixPCH {
pcm.!mixPCH {
         type dmix  
         type dmix  
         ipc_key 1234
         ipc_key 1234
         slave {
         slave {
                 pcm "hwPCH"
                 pcm "hw:PCH"
                 period_time 0
                 period_time 0
                 period_size 1024
                 period_size 1024
Line 76: Line 67:
}
}


pcm.!mixHDMI {
pcm.mixHDMI {
         type dmix
         type dmix
         ipc_key 1235
         ipc_key 1234
         slave {
         slave {
                 pcm "hwHDMI"
                 pcm "hw:HDMI,7"
                 period_time 0
                 period_time 0
                 period_size 1024
                 period_size 1024
Line 96: Line 87:
     card 0
     card 0
     device 7
     device 7
    hint {
        show on
        description "My HDMI hardware"
    }
}
pcm.hwHDMI2 {
    type hw 
    card 0
    device 7
    hint {
        show on
        description "HDMI hardware"
    }
}
pcm.hwPCH {
    type hw
    card PCH
    hint {
        show on
        description "PCH hardware"
    }
}
pcm.hwPCH2 {
    type hw
    card PCH
    hint {
        show on
        description "PCH hardware"
    }
}
}
</pre>
</pre>

Revision as of 08:30, 4 February 2016

ALSA

ALSA (Advanced Linux Sound Architecture) is the new Linux sound system, replacing the deprecated OSS. Alsa offers advanced features such as software mixing for audio cards that don't support hardware mixing. It is thus important to get it properly working.

Kernel Installation

  • The first step is to follow the official Gentoo ALSA guide to get ALSA basically installed and working. The ALSA sources are now included in the kernel, which is very nice. In the normal case, it just consists of running:
emerge -a alsa-utils
rc-update add alsasound boot
  • If you have an Intel HDA soundcard (very frequent), you need to build the correct codec on the kernel. Running alsamixer usually gives you the codec used on your card. Without the correct codec, the soundcard will not work.
  • UPDATE: alsamixer can give a wrong codec it seems (or a codec name that is not clear). In that case the best method is to enable ALL codecs at first, then run alsamixer which will give you a different codec name (the right one). You can then disable the unneeded ones.
  • On Gentoo, if you compile the ALSA driver directly in the kernel (not as module), you may need to edit /etc/conf.d/alsasound to change some settings in order to avoid a warning at boot saying that the driver cannot be found / loaded.

Recent drivers

  • For recent ALSA drivers (1.0.14/1.0.15), everything seems to work better "by default". dmix is activated, Skype and OSS apps just work without any configuration.
  • dsnoop is not yet active by default! This means that recording on the default input source may not work out of the box.

Multiple cards

  • I have encountered a problem when multiple cards are detected by ALSA, as then the default settings won't work for some applications (sound will be sent to a wrong / not working sound card). The easiest fix is to disable the problematic card. If you have ALSA modules statically compiled into the kernel, you must use the following boot options (this should go into GRUB configuration, or if you are using UEFI, directly into the kernel boot parameters):
snd_hda_intel.enable=0,1
  • Sample working configuration with two cards (one PCH and one HDMI):
pcm.!default {
        type plug
        slave.pcm "mixPCH"
        hint {
                show on
                description "Default Sound (either PCH or HDMI), via dmix"
        }
}

pcm.myHDMI {
        type plug
        slave.pcm "mixHDMI"
        hint {
                show on
                description "HDMI Sound Output"
        }
}


pcm.mixPCH {
        type dmix 
        ipc_key 1234
        slave {
                pcm "hw:PCH"
                period_time 0
                period_size 1024
                buffer_size 8192
                rate 44100
        }
        bindings {
         0 0
         1 1
        }
}

pcm.mixHDMI {
        type dmix
        ipc_key 1234
        slave {
                pcm "hw:HDMI,7"
                period_time 0
                period_size 1024
                buffer_size 8192
                rate 44100
        }  
        bindings {
         0 0
         1 1
        }  
}

pcm.hwHDMI {  
    type hw  
    card 0
    device 7
}

HDMI

  • To get HDMI output, it is necessary to have the correct kernel modules compiled. You can check if your HDMI card appears with aplay -l or aplay -L.
  • Once it appears in the list, you can check with amixer contents -c1 (for card #1) if an HDMI cable is connected. But it is very important to understand that just plugging in the cable will NOT update the results of amixer contents (or the value of /proc/asound/cards/1/eld#0.0 for instance). It seems necessary to actually activate the HDMI display via video to get sound. Thus, for instance in KDE, you must go to System Settings -> Display and activate it. Note that Ubuntu this process seems to happen automatically (maybe via polling?), so there would probably be a way to improve this process and even to get it working without actually sending video output to the monitor (for instance if the computer is just connected to an audio receiver / amplificator).
  • Also note that the ELD values necessary for ALSA are parsed from the monitor's EDID value. So with audio HDMI, the video driver plays a very important part. If it is buggy, the system / ALSA won't know about the HDMI audio output.

USB headsets or microphones

  • You need to compile ALSA support for USB devices in the kernel. After that it will appear as a separate sound device in alsamixer for instance. Be careful that many USB devices (such as webcams) also provide sound recording, so you may end up with quite a few sound devices on the system.

Configuration

  • A good way to test out is via the speaker-test command. It is used as such:
speaker-test -c 2 -D myHDMI

The argument after -D (myHDMI, here) is the PCM name defined in asound.conf. Note that sometimes it can fail because of the requested rate (if it does not go through a type plug module, which performs autoconversion).

  • After that, you need to get dmix working, both for ALSA and for OSS (through ALSA emulation). dmix is a plugin to get software sound mixing. Follow this guide on the Gentoo Wiki. Be careful so that you get dmix working correctly with OSS, else some important applications using OSS (Firefox) won't work properly with ALSA applications (Amarok). On AMD64, make sure the 32-bits ALSA emulation libraries are new enough (last section of the wiki).
  • Note that since version 9, Flash Player uses ALSA. There is no more reason to setup Firefox to use OSS. By the way, Firefox by itself does not know at all about sound.
  • To get audio recording working correctly, you need to unmute levels correctly in alsamixer. You also need to choose the correct input sources. In alsamixer, type tab to get to the capture PCMs, else you don't see them in the basic view. Make sure everything is setup correctly and unmuted. You can then test if your microphone is correctly working by running the command:
arecord -f cd -d 2 -t wav -N test.wav

Be careful to specify a record source such as (hw0:0). Sometimes the default record source will not work.

  • IMPORTANT: you need to set to "Capture" your correct source. This means the word CAPTURE in red should appear below, not "----". To toggle the capture status, hit the space bar. If you don't do that, the mic will be unmuted but the computer won't capture/record the sound.
  • If you use dmix, to record correctly you need to setup the asym plugin and the dsnoop plugin. dsnoop is for input what dmix is for output, eg it should mix several input sources into one. I don't think it is as useful as dmix (the really important thing is to have the asym plugin setup), however I've configured it on my system. For Skype to work with dsnoop you need to add some magic values to your /etc/asound.conf file, as shown below.
  • My sample asound.conf file:
# etc/asound.conf:

# We route OSS through dmix

pcm.dsp0 {
    type plug
    slave.pcm "duplex"
}

ctl.dsp0 {
     type plug
     slave.pcm "duplex"
}

# This is just an alias for hw:0,0

pcm.sound_card {
     type hw
     card 0
     device 0
}

# We route everything through the asym plugin by default

pcm.!default {
     type plug
     slave.pcm "duplex"
}

pcm.duplex {
        type asym
                capture.pcm "input"
                playback.pcm "output"
}

# Dmix plugin

pcm.output {
     type dmix
     ipc_key 1024
     slave.pcm "sound_card"

     slave {
          # This stuff provides some fixes for latency issues.
          # buffer_size should be set for your audio chipset.
          period_time 0
          period_size 1024
          buffer_size 8192
     }

     bindings {
          0 0
          1 1
     }
}

# Dsnoop plugin

pcm.input {
        type dsnoop
                ipc_key 1133
                #slave.pcm "sound_card"
                slave {
      # "Magic" buffer values to get Skype audio to work
      # If these are not set, Skype recording (microphone) WILL NOT WORK.
                pcm "sound_card"
                period_size 256
                periods 16
                buffer_size 16384
                }
        bindings {
        0 0
        1 1
        }
}
  • For Wine to work correctly with ALSA, you apparently need to change some sections, reproduced below:
ctl.!default {
        @args [ CARD ]
        @args.CARD {
                type integer
                default 0
        }

        type hw
        card $CARD
}

pcm.!default {
        @args [ CARD DEVICE ]
        @args.CARD {
                type integer
                default 0
        }
        @args.DEVICE {
                type integer
                default 0
        }
        type plug
        slave.pcm "duplex"
}

Note that it is very important that the ctl.!default has only the CARD argument, and that the pcm.!default has both CARD and DEVICE.

ALSA Input Sources

  • They are located at the end of the playback view. Be sure that the Input Source (the first one) is set to whatever you need. You can switch sources by pressing the 'w' or 'x' keys.

ALSA Mixer Levels

  • Everything marked as IEC958 is for digital sound output / input. You usually don't need this.
  • Analog Mix is *not* necessary for recording with a microphone.

asound.conf

  • If you add "!" before a PCM name, it means to override the previously defined PCM (instead of, by default, merging it). This is useful for the generic, defined PCM names such as "default". More information here.

Sound Frameworks

Phonon

  • Because of a bug in Phonon (present in phonon-4.4.x), the Xine backend does not access correctly the dmix (default ALSA) device. Thus until that bug is resolved it is mandatory to use the gstreamer backend in Phonon (or use PulseAudio).
  • Bug link.
  • With current Phonon version (0.8.3), it seems that choosing a source in System Settings does not work correctly. It seems that the "!default" ALSA channel is always used. Also note that KDE / Phonon updates the list available in System Settings, but in a rather strange way (sometimes added configured channels do not appear, if they are not correct, sometimes they don't appear at all).