Mpv, Mplayer: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 12: | Line 12: | ||
* Playing back 1080p (Full HD) videos require quite a bit of CPU power. Thus it is necessary to use all cores of the processor (one will not be enough), or to use the video card to decode the video. In Gentoo there are currently two options to accelerate mplayer: | * Playing back 1080p (Full HD) videos require quite a bit of CPU power. Thus it is necessary to use all cores of the processor (one will not be enough), or to use the video card to decode the video. In Gentoo there are currently two options to accelerate mplayer: | ||
** First and best option is to add the vdpau USE flag to mplayer, which will enable decoding on nvidia cards if you have a GeForce of the 8000 series or later. | ** First and best option is to add the vdpau USE flag to mplayer, which will enable decoding on nvidia cards if you have a GeForce of the 8000 series or later. You can then use VDPAU acceleration with the following options: | ||
mplayer -vo vdpau -vc ffh264vdpau file.mkv | |||
Or add those lines to ~/.mplayer/config: | |||
vo=vdpau,xv | |||
vc=ffh264vdpau,ffvc1vdpau,ffmpeg12vdpau,ffwmv3vdpau | |||
** If your video card is too old, the best is to try the experimental mplayer-mt (multithreaded) branch which will make use of all your cores. At the moment (August 2009), the branch is not merged back into main trunk and is not available in an official Gentoo package. You can try [http://nikita.melnichenko.name/blog.php?id=5&topic=gentoo-ebuild-mplayer-mt&lang=en the ebuild at this page]. Load mplayer in the following way: | ** If your video card is too old, the best is to try the experimental mplayer-mt (multithreaded) branch which will make use of all your cores. At the moment (August 2009), the branch is not merged back into main trunk and is not available in an official Gentoo package. You can try [http://nikita.melnichenko.name/blog.php?id=5&topic=gentoo-ebuild-mplayer-mt&lang=en the ebuild at this page]. Load mplayer in the following way: | ||
mplayer-mt -lavdopts threads=3 file.mkv | mplayer-mt -lavdopts threads=3 file.mkv | ||
Revision as of 09:44, 31 July 2009
Listening to Internet Radios
- Some Internet radios use the rtsp:// streaming protocol. VLC supports this, but Amarok does not, because the Xine engine has no RTSP support yet (although it seems to have basic support for *some* RTSP implementations according to a Xine bugzilla entry).
- Until suppport has been implemented in Xine, use VLC rather than Amarok (or other applications based on the Xine backend) to listen to Internet radios. Amarok works well with HTTP streaming.
- Amarok however support WMA format / codecs. It is the streaming part that causes troubles.
Mplayer
- Note that mplayer binary contains a bundled version of ffmpeg / libavcodec. Thus it does not link to ffmpeg package on Gentoo (actually it does not even need this package).
Accelerating mplayer
- Playing back 1080p (Full HD) videos require quite a bit of CPU power. Thus it is necessary to use all cores of the processor (one will not be enough), or to use the video card to decode the video. In Gentoo there are currently two options to accelerate mplayer:
- First and best option is to add the vdpau USE flag to mplayer, which will enable decoding on nvidia cards if you have a GeForce of the 8000 series or later. You can then use VDPAU acceleration with the following options:
mplayer -vo vdpau -vc ffh264vdpau file.mkv
Or add those lines to ~/.mplayer/config:
vo=vdpau,xv vc=ffh264vdpau,ffvc1vdpau,ffmpeg12vdpau,ffwmv3vdpau
- If your video card is too old, the best is to try the experimental mplayer-mt (multithreaded) branch which will make use of all your cores. At the moment (August 2009), the branch is not merged back into main trunk and is not available in an official Gentoo package. You can try the ebuild at this page. Load mplayer in the following way:
mplayer-mt -lavdopts threads=3 file.mkv