Troubleshooting hardware problems: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
|||
| Line 6: | Line 6: | ||
* I had a case where an nvidia card HDMI output would no longer work (black monitor), even during power-up and bringing up UEFI / BIOS interface. Booting into Windows (using the built-in Intel HD HDMI output from the motherboard) and then switching the HDMI cable to the nvidia card "resurrected" the card. Windows output was even working instantly without a reboot. | * I had a case where an nvidia card HDMI output would no longer work (black monitor), even during power-up and bringing up UEFI / BIOS interface. Booting into Windows (using the built-in Intel HD HDMI output from the motherboard) and then switching the HDMI cable to the nvidia card "resurrected" the card. Windows output was even working instantly without a reboot. | ||
* Make sure you have a powerful enough PSU (Power Supply Unit). I had a case where the computer would freeze very often when using a 600W PSU (and a nVidia GeForce RTX 3080 Ti). [https://forums.developer.nvidia.com/t/frequent-crashes-hangs-with-message-gpu-has-fallen-off-the-bus/265319 See this report.] Switching to a 1000W PSU fixed all the crashes. | |||
== EVGA nVidia GeForce RTX 3080 Ti == | == EVGA nVidia GeForce RTX 3080 Ti == | ||
Latest revision as of 10:25, 20 June 2024
Memory (RAM)
- The Gentoo packages memtest86 and memtest86+ provide tests for the memory in your computer. However, there is no way to run these programs from a running system. They must be ran from a special bootloader: the Gentoo packages basically install that bootloader and add an option to GRUB to start the tests.
Nvidia GPUs
- I had a case where an nvidia card HDMI output would no longer work (black monitor), even during power-up and bringing up UEFI / BIOS interface. Booting into Windows (using the built-in Intel HD HDMI output from the motherboard) and then switching the HDMI cable to the nvidia card "resurrected" the card. Windows output was even working instantly without a reboot.
- Make sure you have a powerful enough PSU (Power Supply Unit). I had a case where the computer would freeze very often when using a 600W PSU (and a nVidia GeForce RTX 3080 Ti). See this report. Switching to a 1000W PSU fixed all the crashes.
EVGA nVidia GeForce RTX 3080 Ti
- The card works, but produces a blank screen at boot (during POST/UEFI BIOS). The screen only starts after Linux (or Windows) has booted. This makes it very difficult to access the BIOS or the GRUB dual bootloader.
- Tried to update motherboard BIOS, GPU VBIOS and firmware without any improvement.